Pelletizing is the process of making waste materials into solid fuel. The pellets are then used for thermal combustion. Feed pellets are one of the most common products of pelletization. Feed pellets can be made from any type of corn, sorghum, bran, soy, wheat, born flour, rice flour or rice hulls, coffee husks, paddy straw, sunflower stalks, mustard, soybean, coconut and others. The moisture content should be less than 15%.
(1).Crushing Process--- poultry feed production line
When the thickness of the raw material is >10 mm, and >50 * 50 mm (L * W), the raw materials must first be used for size reduction before the feedstock is sent to the hammer mill (crusher) to reach a diameter of less than 3 mm.
(2). Mixing Process--- poultry feed production line
a.The feed mixer equality of mixing is below 7 percent.
b.The rim for sending materials is quite big. There is quite few material left in the machine.
c.This feed mixercomprehensively applies in matching feed factory, chemical industry, food, flour and other sectors Mixed in gravity-free state, no segregation, variety of liquids can be added.Conveyed by three chains, run in low speed, stable operation movement. Short mixing period(40-120 sec/batch), high evenness degree (CV5%) may be up to 2%
d.Two open doors structure, discharge rapidly, no leakage, no residue. Multiform liquid adding system and can be matched with compressed air jetting system Suitable for mixing premix, poultry feed, aquatic feed, additives and chemical and medicine industries, etc
(3). Pelletizing Process--- poultry feed production line
SZLH Feed Mill essence of the complete line, has the following features:
1. The lubrication system for feed pellet machine adopts a tracing and inspection system controlled by a microcomputer. When the temperature of the bearings exceeds normal temperatures, the microcomputer will start the auto-lubrication system for lubrication—thereby conveniently ensuring smooth functioning of the rollers. The lubrication system is comprised of a tracing and inspection system controlled by a microcomputer. There is also the option to lubricate by hand.
2. The drive gear is a precision-made transmission mechanism. The bearings are sourced from SKF in Sweden. The ring die uses a hoop fastening method which increases the speed of discharge in comparison with the previous bolt-fastening method. As a result, the capacity is 10-15% higher than the belt transmission structure.
3. The ring die and roller of the Feed pellet machine has been finely machined using alloyed steel. The heat treatment process is different from other domestic manufacturers in that the carburization treatment increases the depth of hard-facing to 2 mm which improves the anti-abrasion properties of the ring die and roller by a factor of ten. This greatly saves on replacement costs.
(4). Cooling Process--- poultry feed production line
After the pelletizing process, the temperature of the feed pellet is about 60-80 degrees Celsius, with a moisture content of about 15%.A Cooler must then be used to reduce the moisture content of the wood pellets to about 3-4%, thereby making the wood pellets easier to store.
Feedback from some foreign clients has suggested that in humid climates, the moisture content must be reduced to 7-8%. In order to satisfy the needs of these clients, we have developed a new Stabilizer Combined Cooler.
(5). Packing Process--- poultry feed production line
After cooling, the feed pellet must be protected from moisture and other environmental conditions. For this there is the packing process, which is effectively handled by our Semi-Auto Packing Machine.
Generally, most clients require a small scale with the auto-sealing packing machine and a scale for higher weight ranges for the semi-auto packing machine. For the first, the weight range is 15-50 kgs per bag, and for the second, it is 800 or 1000 kgs, modified per clients’ needs.
In the operation of the complete Feed pellet plant, the filtering of dust is a key concern. For this purpose we offer the Common Dust Collector (or cyclone) and the Impulse Dust Filter. For air exhaust systems, we provide the Water Film Dust Collector for the greatest dust-free environment in the process of drying and cooling—a highly dust-emitting process.
Note of poultry feed production line
1. Regarding to the spare parts, normally they would be changed per 5 months or so.
2. Final products from the granular machines: the final size could be: Φ2, 4, 6, 8, 10, 12,16mm, etc. The length is 5 – 45 mm.
3. Density: 1.0-1.3t/m3.
4. The minimal quantity per order: 1 set.
5 .Payment: T/T 40% as the deposit, the balance is paid after faxing the copy of B/L.
6 .Delivery time: Within 15 days after receipt of the deposit.
7 .Warranty time: in one year except for spare parts.
Xinxiang HEXIE Group was established in 1992, occupying a total area of approximately 100,000 square meters and it is a diversified high-tech enterprise, engaged in research, production, sales and technical service of feed machinery, breeding equipment and animal pharmacy. Its subsidiaries include Xinxiang HEXIE Feed Machinery Manufacturing Co.,Ltd, Xinxiang HEXIE Smart Breeding Equipment Co.,Ltd and Xinxiang HEXIE Animal Pharmaceutical CO,.Ltd. HEXIE Group provides a comprehensive, systematic and high-quality solutions for agriculture and husbandry industry,trying to bulid a grand blueprint of "Harmonious world HEXIE".
1. Q: Are you a trading company or a manufacturer?
A: We are a manufacturer, which has almost 24 years of experience in this industry.
2. Q: How can I get to your company?
A: You can get a flight to Poultry Feed pellet small production Line Airport. We will go to pick up.
3. Q: How long is your warranty time?
A: One year (Calculated from the equipment arrives the customer’s side.). After this period we will support you when needed. You will be welcome to contact us with any problem may happened.
4. Q: Will you send engineers to install the plant?
A: Yes, but at an extra cost payable by the customer. Or you can get local contractors to do the commissioning and we send one supervising engineer.
5. Q: Do you have some foreign customers using your equipment?
A: Yes, we have.our company has established business relationships with customers in Korea, South Africa, Russia, Thailand, Taiwan, Philippines, Malaysia, Australia, Egypt, Syria, Nigeria, Ethiopia, India, Bangladesh, Pakistan, Iran etc.
Welcome to our factory!
The quality is the life of our corporation, please believe in your choice!
As a leader in the food machinery industry ,we adhere to the principle of honest and trustworthiness all the time,and have a good reputation on the international market.Over the years, we explore and research in extrusion technology, so that the screw extrusion technology application areas are more extensive. Our single and double screw device has been used in the production of snack foods, breakfast cereals: corn chips, fried food, bread crumbs, soybean tissue protein, pet food, over 20 different functions and yield of the production line for choice; also can manufacture special designed according to special requirements the user's.Our products sell well both at home and abroad.Such as Gemany,Italy,Holland,Spain,Russia,Canada,USA,Mexico,Columbia,Japan,SouthKorea,Uzbekistan,Egypt,South Africa and so on.Welcome your enquiry.
3333333 professional production 111111.11111111 is a continuous feeding operation. 22222 production can be used for cattle feed processing, sheep feed processing, horse feed processing, rabbit feed processing, poultry and poultry feed processing, is a new type of small household particle machine, can also be used as feed processing plant Special particle machine, no dust, add the mixed powder feed into the hopper when working, no heating, no water, no drying, once formed by extrusion, the surface of the processed particles is smooth, the hardness is moderate, and the internal curing is deep and transparent. Starch gelatinization, protein coagulation and degeneration, improved nutritional value and digestion and absorption capacity,
Copyright © 2017 - 2019Shandong Leader Machinery All Rights Reserved