SJZ Animal feedstuff grinding and mixing machine/ animal feed pellet mixer
the animal feed production line:
Crushing process – Hammer mill
In the feed processing process there may be a number of ingredients that require some form of processing. These feed ingredients include coarse cereal grains, corn which require particle size reduction that will improve the performance of the ingredient and increase the nutritive value.Hengmu hammer mill is able to produce a wide range of particle sizes, it work with any friable material and fibre and very easy to use. It is used for grinding raw materials by large and medium livestock and aqua feed mills.
Mixing process – Feed Mixer
Efficient mixing is the key to good feed production. The feed will not be the balanced formulation, so it should be well mixed before pelletizing process.Hengmu horizontal feed mixer is a mechanical means of achieving this. It consists of a series of paddles or metal ribbon blades mounted on a horizontal rotor within a semi-circular trough.The blades move the material from one end of the mixer to the other, tumbling it as it goes. It can mix wet ingredients or mixtures of wet and dry materials, as well as mixing dry ingredients.
Pelletizing process – Feed Pellet mill
Pelletizing is a key process to the production of high quality animal feeds as it ensures that the feed formulation is in the correct quantities for all that eat them. It should be mentioned that impurities in the raw materials like metal, may damage the die and rollers of wood pellet making machine, so we equipped demagnetizer to remove the impurities. Each bite of a pellet made by our pellet mill will have the same designed formulation ensuring all the stock are feed as intended.
Cooling and screening process
Cooling and screening process The PeFeatures of Feed Pellet Production Linellets from pellet mill may exit at up to 88°C and 17-18% moisture. The temperature of pellets must be quickly reduced to make the moisture level to 10-12% or less for proper storage and handling. Pellets must therefore be cooled and dried. Our cooler Adopt counter-flow cooling principle, pellet cooled fully and equally. The temperature of the pellets after cooling is not higher than room temperature 5 degree.
the animal feed mixer in the animal feed production line
SLHY Series Single Shaft Double Belt Mixer:
1. Adjustable paddle structure.
2. Reliable spray system.
3. Mixing uniformity: ≤7,Mixing time:2-4 minutes.
4. Feed inlet on one side with decompression holes on both sides.
5. The gap between the paddle and the machine slot is adjustable
6. Many liquids--like water, oil, etc,--can be easily added in.
SHW Series Single Shaft Double Belt Mixer:
1. Mixing uniformity≤7,Mixing time:2-3 minutes
2. Widely used in small and medium scale feed plant in the animal and breeding industry
3. Original and patented product.
4. Body section is round to prevent un-mixable angles.
5. No blockage inside;feed inlet on one end for feeding, while packing on the other.
SLHSJ Double Paddle Mixer:
|Model||SLHSJ0.3||SLHSJ 0.5||SLHSJ 1.0||SLHSJ 2.0||SLHSJ 3.0||SLHSJ4.0|
1. Mixing in gravity--free state won’t cause segregation.Multiform liquids can be added in.
2. Conveyed by three chains running at a low speed for increased stability.
3. Short mixing period(40-120 sec/batch), mixes evenly at a high rate of consistency (CV=5%,min 2%).
4. Two door structure;discharges rapidly, with no leakage, and little residual.
5. Variable system for adding liquids, and it can be matched with compressed air jetting system.
6. Widely used at premixing compounds,and in the poultry, aquatic feed,chemical, and pharmaceutical industries.
1.Small feed mixer for sale is widely used in mixing the powder, granule ect ,various liquid can be added. Now it is widely used in animal feed industry, fertilizer industry, aquatic product breeding,chemical industry, aquatic product breeding, medicine and so on.
2.Small feed mixer for sale has two feeding door on top, one is used to add main materials , the other is used to add additive. the output door is manual to discharge. Also it contains liquid pump, which can addliquid , when liquid spray to mixer ,will become steam, making high mixing efficiency.
3.Mixing time is short (3-6minutes/batch). Adding input and output time, the mixing time is about 15-20minutes per batch(full load working), it can mix 3-4 times per hour. The degree of homogeneity is high(cv is smaller than 5%)
SJZ Animal feedstuff grinding and mixing machine/ animal feed pellet mixer adopts world-class technology to customize and produce special racks. High strength, high wear resistance, sharp teeth, uniform and delicate powder slag processing, higher starch extraction rate. The replacement of racks is quick and easy, which greatly reduces the labor intensity of labor and greatly increases the production efficiency. The separation part adopts a non-frame type three-section separation structure, which has small resistance and is more energy-efficient.
SJZ Animal feedstuff grinding and mixing machine/ animal feed pellet mixer main functions:
For the extraction of potato starch, automatic fresh potato feed, crushing, separation, slagging, pulping. is also suitable for sweet potato, sweet potato, hawthorn, kudzu, plantain, and cassava.
1: The smashing part is the first to use thorn bar type, discarding the manual sprint method in the past.
2: The lifespan of steel piercing teeth is twice the life of the previous piercing teeth, and can be replaced in ten minutes after wear.
3: The separation section uses a thick 40cm diameter separation tube, the separation is more clean, and the powder extraction rate is more than 99%.
Jinan Joysun Machinery Co., Ltd. is a modern food machinery and equipment manufacturing enterprise integration R&D, manufacturing, sales, and after-sales services.
Copyright © 2017 - 2018Shandong Leader Machinery All Rights Reserved