Home >  microwave dryer >  High-Speed microwave Rotating flash dryer
High-Speed microwave Rotating flash dryer High-Speed microwave Rotating flash dryer High-Speed microwave Rotating flash dryer

High-Speed microwave Rotating flash dryer

XSG spin flash drying machine Product Description spin flash drying machine Description XSG series rotary flash drying machine is my factory in the...
  • 1.5,*2m*5m
  • Within 5 working days
  • paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
  • Contact with us
  • China
  • microwave dryer
  • ISO9001
  • microwave dryer

Product Description

XSG spin flash drying machine

Product Description

spin flash drying machine Description

XSG series rotary flash drying machine is my factory in the introduction, absorption, on the basis of foreign advanced technology, successfully developed a new type of drying equipment. This advanced technology, reasonable design, compact structure, wide scope of application, large production capacity, products of good quality and high efficiency, energy saving, in a dry equipment, crushing, sieving one-time completed, eliminate the pollution of the environment, the whole machine performance reached the international advanced technology level.flash drying machine Principle
Hot air by the inlet pipe to the suitable spouted velocity from the bottom of the dryer into the mixing crushed drying chamber, the material produce strong shearing, blowing floating and rotating effect, so the material by centrifuge, shearing, collision, friction and particles, and to strengthen the heat transfer and mass transfer. At the bottom of the dryer is bigger than the wet particle mass under the action of stirrer were mechanical crushing, with low moisture content, granularity of smaller particles entrained by the rotating flow increase, rising further in the process of drying. Because of gas-solid two phase rotating flow, solid phase of inertia is greater than the gas phase and two phases of gas in the relative velocity is larger, strengthen two heat transfer and mass transfer, so the machine produce high strength.
flash drying machine Features
Variety of feeding device for selection, continuous stable feeding, process won't produce bridge phenomenon in the middle.
"At the bottom of the dryer set special cooling device, avoids the production material in the bottom of drier deterioration phenomenon.
Second-ranking special pressure seal and bearing cooling device, effectively prolong the service life of transmission parts.
Low special air distributing device, reduce the resistance of the equipment, and provide the effective of air dryer.
There are rotation flow pieces and low drying chamber fitted with grading ring, adjustable fineness and raw material. (such as calcium carbonate water regulator to 0.1% or less)
Low compared with other drying method, which can effectively increase the material proportion.
Low dry indoor circumferential gas velocity is high, the material stay time is short, effective prevent deterioration phenomenon of wall material viscosity and heat sensitive material, to achieve efficient, fast, small equipment, mass production.flash drying machine Material
Low categories: inorganic borate, calcium carbonate, hydroxide, copper sulfate, ferric oxide, barium carbonate, antimony trioxide, all kinds of metallic hydroxide, all kinds of heavy metal salt, synthetic cryolite and so on.
Low organic matter: atrazine (pesticides), lauric acid, benzoic acid, benzoic acid, antiseptic, Dan, sodium oxalate, cellulose acetate, etc.
Low ceramic: kaolin clay, silica, clay.
Low dye categories: anthraquinone, black ferric oxide, indigo blue pigment, butyric acid, titanium hydroxide, zinc sulfide, all kinds of azo dye intermediates.
Second-ranking food: soy protein, starch gel, grains, wheat, sugar, wheat starch.
Packaging & Shipping

Our Services

As a good and rich experience supplier, we should offer customer the best quality and best price of the machine.
1. Introduce the suitable product to the customer in detail, answer the question raised by customer carefully;
2.Make the suitabe project as the customer requirement and make sure the machine is suitable for the material;

Sale service:
1. Ensure product with high quality and pre-commissioning before delivery;
2. Delivery on time;
3.Provide full set of documents as customer’s requirements.

After-sale service:
Provide considerate services to minimize clients’ worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;

6.Provide technical support;
7.Establish long-term and friendly relationship.

Service commitment:
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely;
3.Send every client a preferential quotation.

Company Information


Q: How can I visit your factory?
A: Yes. my company is near Shanghai.It only takes you about 1 hour to get Changzhou.Or we can visit you in Shanghai.

Q: What’s the quality of your products?
A:Parts of our products come with best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely.

Q: What to do if the machine has a problem?
A:24 hours timely response of mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost.

Q: How long is the warranty of your equipment?
A: Our warranty period is one year generally.

Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before shipment. Other ways can also be received after we both sides discussion and agreement.

Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai, if you request CIF, please give us your delivery port, and we will give you CIF price.

Important notice

In order to quote you the right drying machine equipment with best price, we would like to get the following information include in your inquiry:

  • -What is the raw material? Material related characteristic? Does it corrosive, strong basicity, or highly acid? Please confirm.

  • -What is the capacity per hour you need (kg/h)?

  • -What is the initial moisture and final moisture of finished products you require to get?

  • -What about the maximum heat temperature of raw material?

  • -What kind of fuel you use to heat the dryer? Natural gas, electricity, fuel oil or steam?

  • -Which equipment material do you like prefer? SUS304, SUS316L or Carbon steel?

  • -Provide us your country’s electricity information, such as phases, voltage, HZ?

  • -How about dust collect requirements?

  • -Other special requirements?

Jinan Joysun Machinery Co., Ltd., relying on strong technical support, advanced production equipment, excellent processing technology and scientific detection methods, we ensure product quality and delivery time, and provide a fully optimized technical solution according to your requirements. Jinan Joysun Machinery Co., Ltd. for thawing of meat products and seafood, the equipment has stable performance, reliable quality and short thawing time. It is an ideal defrosting equipment for high-tech meat products, made of stainless steel, conforming to food production standard. Welcome new and old customers to inquire. Our international business covers customers all over the world. We have competitive prices and are proud of our excellent after-sales service. The working attitude of the company and the continuous improvement of the innovation concept will lead Tuo Bo and you to step into the brilliant future hand in hand and create a better future.
Through continuous exploration and practice, the company has developed the advantages of low investment, high efficiency, low operation cost, high product quality and convenient control and operation. The microwave frequency thawing equipment with microwave frequency of 915MHz and output power of 20kw-200kw is above. For food processing enterprises such as chain fast food industry in China, food thawing is provided, and the improvement of food thawing technology in China is also renewed. The benefit is not only "farsightedness", but also at the foot of the eyes. According to experts, the traditional food thawing are based on heat conduction method, material surface temperature is higher than the internal temperature in the thawing process, inevitably there will be drop loss, which will increase the business loss. If merchants use microwave dryer, High-Speed microwave Rotating flash dryer power, material temperature and transmission speed can be used to achieve adjustable linkage, and the overall heating process control advantages can greatly reduce material consumption and improve food utilization. In addition, as the microwave thawing only needs electricity, no need to consume a lot of water, in the low carbon era, this is not lost a recommended fashion trend.

microwave dryer is a new type of environmental protection drying method. When dry, High-Speed microwave Rotating flash dryer directly to the medium molecules converted into heat, because the High-Speed microwave Rotating flash dryer penetrating performance of heating medium and at the same time, no need to heat conduction, so the heating speed is very fast, the water content below 30% of the food, the drying speed can be shortened hundreds of times.


microwave dryer advantages of equipment

1, microwave dryer, short, fast

Conventional thermal sterilization is used to transmit heat from the surface of the food to the interior through heat conduction, convection, or radiation. It often takes a long time to get the germicidal temperature. The High-Speed microwave Rotating flash dryer is the direct interaction between microwave energy and microorganisms such as food and bacteria. The interaction between heat effect and non thermal effect can achieve fast warming and bactericidal action, and the processing time is greatly reduced. The sterilization effect of various materials is usually 3-5 minutes.


2, High-Speed microwave Rotating flash dryer low temperature sterilization keep the nutrition and traditional flavor The High-Speed microwave Rotating flash dryer is through special heat and non thermal effect sterilization, compared with conventional thermal sterilization, it can get the desired disinfection effect at relatively low temperature and short time. Practice shows that the general sterilization temperature can reach the effect at 75-80 degrees centigrade. In addition, microwave dryer processed foods can retain more nutrients and color, aroma, taste, shape and other flavors, and have puffing effect. For example, the vitamin C retained in vegetables treated by conventional heat treatment is 46-50%, while that in microwave treatment is 60-90%, while that in conventional heating is 58%, while that in microwave heating is 84%.


3 microwave dryer and High-Speed microwave Rotating flash dryer save energy Conventional thermal sterilization often has heat loss in the environment and equipment, and microwave is directly treated to food, so there is no extra heat loss. In addition, the conversion efficiency of the electric energy to the microwave energy is in the 70-80%, and the power is generally reduced to 30-50%.



Shandong Leader Machinery
Mobile : 18660125156
Website : www.digit-life.com
Telephone : 86-05331-85064681
Mail : info@ldfoodmachine.com
Fax : 86-05331-85064682
Address : Leader Industrial Park Area F,Jinan,Shandong China

Copyright © 2017 - 2018Shandong Leader Machinery All Rights Reserved