Allen
Product Description
High microwave Speed algae industrial centrifugal spray dryer with PLC control system LPG-5 Model Small Scale Laboratory Pilot Lab Spray Dryeris a technology most widely used in the liquid technology shaping and in the drying industry. The drying technology is most suitable for producing solid powder or particle products from liquid materials, such as solution , emulsion, suspension and pumpable paste states, For this reason, when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.
Detailed Images| Model | LPG-5 |
| Water Evaporation Capacity | 5㎏/h |
| Inlet Air Temperature | 250-350℃ Adjustable |
| Outlet Air Temperature | 80-100℃ Adjustable |
| Heating Air Method | Electricity Heater |
| Atomizer Type | High Speed Centrifugal Spray |
| Discharge Method | Dual Cyclone Separator(Quick Connections) |
| Machine Materials | Refer to attachment chart |
| Power Supply | 380V,50HZ,3 Phase(Made as customer request) |
water
feed pump-------- →centrifugal spray atomizer
slurry ↓
high-efficiency air filter → drying chamber
↑ ↓
Electrical heater cyclone → finish product
↑ ↓
Steam exchanger suction fan
↑ ↓
blower spray dust catcher
↑ ↓
Elementary and middle exhaust emission
efficiency air filter
Original liquid would be feed by Peristaltic Pump frm vessel, and become spray with help of High Speed Atomizer, the atomizer would be driven by Compressed Air. Atomizing Disc diameter can be reac 25000 rpm at most. Peristaltic Pump can be adjusted and stable, which can ensure Feeding Stably and Control Temperature effectively.
The new air would be filtered by Pre-filter and Mid-filter, then start to be heated by Electricity, until inlet air temp. reach above 300C(Depend on actual need). At this moment, the heater air would be enter the spray chamber uniformly, with the help of Spirl-type Hot-ait Distributor on the cover. After hot air touch with Spray Dryer materials, water can be evaported very fast, fine and dryer powder can be collected by cylone separator.
Atomizer is the most important accessory in spray drying machine, it is used for changing LIQUID status into SPRAY status at a high speed rotation motions, usually can reach 18000~25000 rpm, Our company has adopt Chinese Specilalzied Supplier, can ensure customers for 2 years warranty period.
LPG Spray Dryer have adopt quick connection, easy to maintain, top tight fittings
Related Products
91.8% Response Rate
95.8% Response Rate
97.8% Response Rate
Packing & DeliveryCertification
Our Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
Feedback Contact us
Jinan Joysun Machinery Co., Ltd., relying on strong technical support, advanced production equipment, excellent processing technology and scientific detection methods, we ensure product quality and delivery time, and provide a fully optimized technical solution according to your requirements. Jinan Joysun Machinery Co., Ltd. for thawing of meat products and seafood, the equipment has stable performance, reliable quality and short thawing time. It is an ideal defrosting equipment for high-tech meat products, made of stainless steel, conforming to food production standard. Welcome new and old customers to inquire. Our international business covers customers all over the world. We have competitive prices and are proud of our excellent after-sales service. The working attitude of the company and the continuous improvement of the innovation concept will lead Tuo Bo and you to step into the brilliant future hand in hand and create a better future.
Through continuous exploration and practice, the company has developed the advantages of low investment, high efficiency, low operation cost, high product quality and convenient control and operation. The microwave frequency thawing equipment with microwave frequency of 915MHz and output power of 20kw-200kw is above. For food processing enterprises such as chain fast food industry in China, food thawing is provided, and the improvement of food thawing technology in China is also renewed. The benefit is not only "farsightedness", but also at the foot of the eyes. According to experts, the traditional food thawing are based on heat conduction method, material surface temperature is higher than the internal temperature in the thawing process, inevitably there will be drop loss, which will increase the business loss. If merchants use microwave dryer, High microwave Speed algae industrial centrifugal spray dryer with PLC control system power, material temperature and transmission speed can be used to achieve adjustable linkage, and the overall heating process control advantages can greatly reduce material consumption and improve food utilization. In addition, as the microwave thawing only needs electricity, no need to consume a lot of water, in the low carbon era, this is not lost a recommended fashion trend.
microwave dryer is a new type of environmental protection drying method. When dry, High microwave Speed algae industrial centrifugal spray dryer with PLC control system directly to the medium molecules converted into heat, because the High microwave Speed algae industrial centrifugal spray dryer with PLC control system penetrating performance of heating medium and at the same time, no need to heat conduction, so the heating speed is very fast, the water content below 30% of the food, the drying speed can be shortened hundreds of times.
AAABB
microwave dryer advantages of equipment
1, microwave dryer, short, fast
Conventional thermal sterilization is used to transmit heat from the surface of the food to the interior through heat conduction, convection, or radiation. It often takes a long time to get the germicidal temperature. The High microwave Speed algae industrial centrifugal spray dryer with PLC control system is the direct interaction between microwave energy and microorganisms such as food and bacteria. The interaction between heat effect and non thermal effect can achieve fast warming and bactericidal action, and the processing time is greatly reduced. The sterilization effect of various materials is usually 3-5 minutes.
AAABU
2, High microwave Speed algae industrial centrifugal spray dryer with PLC control system low temperature sterilization keep the nutrition and traditional flavor The High microwave Speed algae industrial centrifugal spray dryer with PLC control system is through special heat and non thermal effect sterilization, compared with conventional thermal sterilization, it can get the desired disinfection effect at relatively low temperature and short time. Practice shows that the general sterilization temperature can reach the effect at 75-80 degrees centigrade. In addition, microwave dryer processed foods can retain more nutrients and color, aroma, taste, shape and other flavors, and have puffing effect. For example, the vitamin C retained in vegetables treated by conventional heat treatment is 46-50%, while that in microwave treatment is 60-90%, while that in conventional heating is 58%, while that in microwave heating is 84%.
PPPEE
3 microwave dryer and High microwave Speed algae industrial centrifugal spray dryer with PLC control system save energy Conventional thermal sterilization often has heat loss in the environment and equipment, and microwave is directly treated to food, so there is no extra heat loss. In addition, the conversion efficiency of the electric energy to the microwave energy is in the 70-80%, and the power is generally reduced to 30-50%.
PPOOO
Copyright © 2017 - 2018Shandong Leader Machinery All Rights Reserved
English
