Material is fed into the dryer from feeding port, under the action of vibrating force, material moves forward with the fluidized state continuously along the horizontal direction. Hot air passes through fluid bed from bottom to up and does heat exchange with damp material. After the powder is collected by cyclone separator, damp air is exhausted out. Dried product is discharged from discharging port.Features
1.Upper bed and bottom bed adopt the new quit-open type structure, upper bed can be moved quickly. It is easy to clean completely.
2.Bed plate adopts laser punching way to make, it can avoid the plate be out of shape during the common punching process
3.Bottom plate is supported by stainless steel seamless tube, the structure of bed is stronger, and operational life is long
4.Material is heated uniformly, heat exchange is full, drying intensity is high, energy saving is about 30% than common dryer.
5.Vibrating source is vibrating motor, its work is stable, easy to maintain, noisy is low, life is long.
6.Fluidized state is stable, no dead corner or broken out phenomenon
7.Adjustability is good, and application scope is wide
8.Small damage to the surface of material, it can be used for drying breakable materials. It doesn’ effect the work efficiency when the shape of material is irregular.
9.Adopts all closed structure, it can avoid the cross pollution between material and air effectively. Work environment is clean.Application
Vibrating fluid bed dryer is widely used in light industry, chemical industry, foodstuff, agricultural products, powder, granule, and small block material in pharmaceutical industry. Material examples are as following: refined salt, aginomoto, citric acid, oxalate, potassium permanganate, sesame, pentaerythritol, HPAM, feed, hypha protein, sodium sulfate, plastic archon, catalyst, stripping and slicing potato, baking soda, detergent, quartz sand, soybean billet, ban pulp, metal powder, boric acid, sodium borate, activated clay, compound fertilizer, eat.
Sketch Of Flow Chart
Packaging & Shipping
Jinan Joysun Machinery Co., Ltd., relying on strong technical support, advanced production equipment, excellent processing technology and scientific detection methods, we ensure product quality and delivery time, and provide a fully optimized technical solution according to your requirements. Jinan Joysun Machinery Co., Ltd. for thawing of meat products and seafood, the equipment has stable performance, reliable quality and short thawing time. It is an ideal defrosting equipment for high-tech meat products, made of stainless steel, conforming to food production standard. Welcome new and old customers to inquire. Our international business covers customers all over the world. We have competitive prices and are proud of our excellent after-sales service. The working attitude of the company and the continuous improvement of the innovation concept will lead Tuo Bo and you to step into the brilliant future hand in hand and create a better future.
Through continuous exploration and practice, the company has developed the advantages of low investment, high efficiency, low operation cost, high product quality and convenient control and operation. The microwave frequency thawing equipment with microwave frequency of 915MHz and output power of 20kw-200kw is above. For food processing enterprises such as chain fast food industry in China, food thawing is provided, and the improvement of food thawing technology in China is also renewed. The benefit is not only "farsightedness", but also at the foot of the eyes. According to experts, the traditional food thawing are based on heat conduction method, material surface temperature is higher than the internal temperature in the thawing process, inevitably there will be drop loss, which will increase the business loss. If merchants use microwave dryer, ZLG microwave Vibrating Fluid Bed Dryer For Oxalate power, material temperature and transmission speed can be used to achieve adjustable linkage, and the overall heating process control advantages can greatly reduce material consumption and improve food utilization. In addition, as the microwave thawing only needs electricity, no need to consume a lot of water, in the low carbon era, this is not lost a recommended fashion trend.
microwave dryer is a new type of environmental protection drying method. When dry, ZLG microwave Vibrating Fluid Bed Dryer For Oxalate directly to the medium molecules converted into heat, because the ZLG microwave Vibrating Fluid Bed Dryer For Oxalate penetrating performance of heating medium and at the same time, no need to heat conduction, so the heating speed is very fast, the water content below 30% of the food, the drying speed can be shortened hundreds of times.
microwave dryer advantages of equipment
1, microwave dryer, short, fast
Conventional thermal sterilization is used to transmit heat from the surface of the food to the interior through heat conduction, convection, or radiation. It often takes a long time to get the germicidal temperature. The ZLG microwave Vibrating Fluid Bed Dryer For Oxalate is the direct interaction between microwave energy and microorganisms such as food and bacteria. The interaction between heat effect and non thermal effect can achieve fast warming and bactericidal action, and the processing time is greatly reduced. The sterilization effect of various materials is usually 3-5 minutes.
2, ZLG microwave Vibrating Fluid Bed Dryer For Oxalate low temperature sterilization keep the nutrition and traditional flavor The ZLG microwave Vibrating Fluid Bed Dryer For Oxalate is through special heat and non thermal effect sterilization, compared with conventional thermal sterilization, it can get the desired disinfection effect at relatively low temperature and short time. Practice shows that the general sterilization temperature can reach the effect at 75-80 degrees centigrade. In addition, microwave dryer processed foods can retain more nutrients and color, aroma, taste, shape and other flavors, and have puffing effect. For example, the vitamin C retained in vegetables treated by conventional heat treatment is 46-50%, while that in microwave treatment is 60-90%, while that in conventional heating is 58%, while that in microwave heating is 84%.
3 microwave dryer and ZLG microwave Vibrating Fluid Bed Dryer For Oxalate save energy Conventional thermal sterilization often has heat loss in the environment and equipment, and microwave is directly treated to food, so there is no extra heat loss. In addition, the conversion efficiency of the electric energy to the microwave energy is in the 70-80%, and the power is generally reduced to 30-50%.
Copyright © 2017 - 2019Shandong Leader Machinery All Rights Reserved