Home >  microwave dryer >  Multifunction microwave Mini Experimental Dryer
Multifunction microwave Mini Experimental Dryer Multifunction microwave Mini Experimental Dryer Multifunction microwave Mini Experimental Dryer

Multifunction microwave Mini Experimental Dryer

Multifunction Mini Experimental Dryer GPQ mini multifunction experimental dryer centralizes such various processes as spraying drying, fluid bed drying, fluid bed spray...
  • Within 5 working days
  • paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
  • Contact with us
  • China
  • microwave dryer
  • microwave dryer

Product Description

Multifunction Mini Experimental Dryer

GPQ mini multifunction experimental dryer centralizes such various processes as spraying

drying, fluid bed drying, fluid bed spray granulation, evaporation and concentration,

and flash drying onto a single machine occupying less than 0.5 square meters.

Compared with productive equipment, it has a good many merits as follows, low investment

and cost, small bulk, less occupation and throughput, and flexible operation. It is suitable for

the demands of the new products development of the college, scientific research institution,

enterprises, especially the expensive products development. It can be widely used in the

various drying processes in such the fields as biology, chemical, pharmacy, food, dyestuff,

light industry and pesticide, etc.

Spray drying process:

Air is heated in electric heater through the fan, then goes into the spray dryer through the top.

Slurry flows into pneumatic atomizing nozzle from liquid material tank by peristaltic pump,

atomized into small droplets by the compressed air come from the nozzle. The small droplets

spurt out downward, mixes with hot air of the drying chamber, along with water evaporating

instantly. Slurry turns into fine powder in a moment by drying. The coarse powder is collected

at the bottom of spray dryer, subsequently the fine powder is gathered in the cyclone. The

exhaust air is discharged after recovery in the bag filter.

Fluid bed drying process:

Air is heated in electric heater through the fan, then goes through the gas distributor into the

fluid bed dryer; and material enters the fluid through the top. Materials keep fluid in virtue of the flotage effect of the hot air. Energy and mass exchange in the fluid bed dryer.

The exhaust air goes into the cyclone to recover the entrained dust, then discharges after the

bag filter.

GPQ multifunction mini experimental dryers main body is 700mm long, 700mm wide,

1600mm high, and consists of two major parts. The left part is the electric heater which is

used for the heating of the air; the right part is the automatic control system, PLC, which can

automatically control the inlet and outlet air temperatures, inlet air rate and drying time during

the drying process according to the set value. By fixing various sets of subassembly onto the

body, the processes of Spray Drying, Fluidized Bed Drying, Spray Granulation, and so forth,

can be implemented, to gain powder products.

Design parameters:




Integrally Moving


( length×width×height )700mm×700mm×1600mm

Heating Mode

Electric Heating

Electric Heater Power


Compressed Pneumatic Pressure


Inlet Air Temperature

80300 (Adjustable, automatic control )

Water Evaporation Rate


Total weight


Control Mode


Jinan Joysun Machinery Co., Ltd., relying on strong technical support, advanced production equipment, excellent processing technology and scientific detection methods, we ensure product quality and delivery time, and provide a fully optimized technical solution according to your requirements. Jinan Joysun Machinery Co., Ltd. for thawing of meat products and seafood, the equipment has stable performance, reliable quality and short thawing time. It is an ideal defrosting equipment for high-tech meat products, made of stainless steel, conforming to food production standard. Welcome new and old customers to inquire. Our international business covers customers all over the world. We have competitive prices and are proud of our excellent after-sales service. The working attitude of the company and the continuous improvement of the innovation concept will lead Tuo Bo and you to step into the brilliant future hand in hand and create a better future.
Through continuous exploration and practice, the company has developed the advantages of low investment, high efficiency, low operation cost, high product quality and convenient control and operation. The microwave frequency thawing equipment with microwave frequency of 915MHz and output power of 20kw-200kw is above. For food processing enterprises such as chain fast food industry in China, food thawing is provided, and the improvement of food thawing technology in China is also renewed. The benefit is not only "farsightedness", but also at the foot of the eyes. According to experts, the traditional food thawing are based on heat conduction method, material surface temperature is higher than the internal temperature in the thawing process, inevitably there will be drop loss, which will increase the business loss. If merchants use microwave dryer, Multifunction microwave Mini Experimental Dryer power, material temperature and transmission speed can be used to achieve adjustable linkage, and the overall heating process control advantages can greatly reduce material consumption and improve food utilization. In addition, as the microwave thawing only needs electricity, no need to consume a lot of water, in the low carbon era, this is not lost a recommended fashion trend.

microwave dryer is a new type of environmental protection drying method. When dry, Multifunction microwave Mini Experimental Dryer directly to the medium molecules converted into heat, because the Multifunction microwave Mini Experimental Dryer penetrating performance of heating medium and at the same time, no need to heat conduction, so the heating speed is very fast, the water content below 30% of the food, the drying speed can be shortened hundreds of times.


microwave dryer advantages of equipment

1, microwave dryer, short, fast

Conventional thermal sterilization is used to transmit heat from the surface of the food to the interior through heat conduction, convection, or radiation. It often takes a long time to get the germicidal temperature. The Multifunction microwave Mini Experimental Dryer is the direct interaction between microwave energy and microorganisms such as food and bacteria. The interaction between heat effect and non thermal effect can achieve fast warming and bactericidal action, and the processing time is greatly reduced. The sterilization effect of various materials is usually 3-5 minutes.


2, Multifunction microwave Mini Experimental Dryer low temperature sterilization keep the nutrition and traditional flavor The Multifunction microwave Mini Experimental Dryer is through special heat and non thermal effect sterilization, compared with conventional thermal sterilization, it can get the desired disinfection effect at relatively low temperature and short time. Practice shows that the general sterilization temperature can reach the effect at 75-80 degrees centigrade. In addition, microwave dryer processed foods can retain more nutrients and color, aroma, taste, shape and other flavors, and have puffing effect. For example, the vitamin C retained in vegetables treated by conventional heat treatment is 46-50%, while that in microwave treatment is 60-90%, while that in conventional heating is 58%, while that in microwave heating is 84%.


3 microwave dryer and Multifunction microwave Mini Experimental Dryer save energy Conventional thermal sterilization often has heat loss in the environment and equipment, and microwave is directly treated to food, so there is no extra heat loss. In addition, the conversion efficiency of the electric energy to the microwave energy is in the 70-80%, and the power is generally reduced to 30-50%.



Shandong Leader Machinery
Mobile : 18660125156
Website : www.digit-life.com
Telephone : 86-05331-85064681
Mail : info@ldfoodmachine.com
Fax : 86-05331-85064682
Address : Leader Industrial Park Area F,Jinan,Shandong China

Copyright © 2017 - 2019Shandong Leader Machinery All Rights Reserved