Forerunner in the industry of oil extraction, our range of is superior in technology and functioning. There is a great demand of our oil expellers in the industry. With excellent capability of extracting best quality oil and cake from all known oil seeds, Small and big scale moringa oil extraction machine are developed in wide range of capacities. In these expellers or screw presses, there is integrated heavy duty ball and roller bearings that ensure low noise operations, thus maximizing their working life. Due to high capacity motor installed in the machines, the total efficiency comes out to be excellent. There is a low cost initial investment in installing these Small and big scale moringa oil extraction machine with no such requirement of maintenance. ensure high yield at low operating cost, thus proved to be a complete energy efficient oil expeller in the industry.
When Small and big scale moringa oil extraction machine is operating, prepared materials enter the extruding chamber from the hopper and then moves forwards by the rotating pressing. Screwed and is pressed. Under the high pressure will be created, which also creates friction and relative movement among material particles. On the other hand, Small and big scale moringa oil extraction machine root diameter of the pressing screw varies larger from one end to the other hence, when rotating, it not only pushes particles moving but turns outwards as well.
CE approved flex seed oil expeller for sale
Flex seed oil expeller Flowchart:
Metering →Cleaning →Magnetic separation→Destoner→Crushing →Softening →Flaking
→Cooking →Pre-pressing →go to extraction section
Second oil press
Pretreatment Process of Flex seed oil expeller
a. Cleaning device: To remove various impurities in oilseeds, such as: iron, stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.
b. Crushing machine: Oilseeds are crushed into 6-8 pieces. In order to meet the requirements of crushing, the peanut is suitable for crushing with the moisture of 7% to 12%.
c. Softening Process: The purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
d. Flaking process: Rolling raw material into flakes, and the purpose is to increae surface area, destroy the peanut cell tissue, shorten the way of oil out from cake.
e: Cooking process: Use steam cooking, inject direct steam and cook the flakes to meet the requirement of oil press.
f. Prepress: Press the flakes to leave about 16%-18% in the cake. The cake will go to extraction process.
g. Second oil press: Press the cake till the oil residue is about 5%.
Flex seed oil expeller Consumption in Operation:
Residual oil in cake
≤5% (SUNFLOWER )
Crude oil moisture and volatile matter
≤ 0.3% (adjustable)
Moisture in crude oil
≤ 0.2% (qualified detonated experiment
(1) Function: Edible oil extraction machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.
(2) Use range: Edible oil solvent extraction fits for pre-press extraction of high oil- content materials and direct once time extraction of low-oil-content materials.
(3) Main parts: The edible oil extraction making series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
2. Main parts function
(1) Solvent pumps: continuously spray solvent to the rotary-typr extractor.
(2) Roary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).
(3) DTDC: used to separate the solvent from the wet meal.
(4) Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.
(5) Miscella tank 2nd: the purified miscella will be pumped into it.
(6) Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
(7) Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
3. Main Process
(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
(2) Meal is send to toaster. Through the toaster, the solvent in the meal will seperate from the meal.The solvent goes to condenser and is recycled to rotary extraction.
(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
(1) High oil yield, obvious economic benefit
(2) Less residual oil rate in the dry meal.
(3) Improving the quality of the meal.
(4) Low processing cost, high labor productivity.
Henan Dinter Heavy Industry Machinery Co., Ltd. is a professional modern enterprise which specialized in manufacturing edible oil press machines suitable various oilseed crops, We have been engaged in manufacturing vegetable oil press machine for more than 30 years including 5 years overseas market experience. We have three manufacturing plants, tens of independent & professional departments to serve global customers. Our company constantly implements advanced management, sales and technology, and learn the domestic and foreign management mode. We combine advanced foreign technology with independent research, we move forward continuously to higher level product quality and after-sales service.
Our products have obtained certificates of ISO9001:2000, ISO14001 and CE .Our business philosophies are "customer first, service excellent" . We regard customers demands as our center, and we can design products specially to satisfy their requirements. We lay stress on research and development technology, strictly manufacturing, timely transportation, and we will send our engineers to install machine and train customers workers, moreover we offer lifelong after-sales service freely. Our products are quite popular in domestic and overseas market for the special design, good looking, safe using and good quality.
Our enterprise cultural concept is : "shared ,happy, growing", we regard "no perfect individual, only perfect team "as our motto. We will go from strength to strength in the process of sharing and happy, we will try our best to offer satisfied service and grow up with customers all over the world.
The Main Business Field of Dinter Company
• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.
Packaging & Shipping
1. General design and planning of the factory.
2. Turn-key project is accepted.
3. 12 months warranty and long term technical support.
4. Engineer is available for installatlion and commissiong oversea.
5. Operator training is support.FAQ
Q: How to ask quotation?
A: Please note us what tpye of raw seeds , and how many tons of raw seeds you want to treat per day, then we will send you quotation as soon as we can.
Q: What's the difference between sunflower oil process and soybean oil process?
A: The biggest difference between these two is that the sunflower oil need dewaxing after refining.
Q: Why need extraction ?
A:If only pressed, oil residue inside cake is very high at lease 6%. But after extraction, the oil residue will be less than 1%, which greatly increases the oil yield.
Q: What chemical is used in oil extraction machine, and this chemical can be recovered?
A: Solvent n-hexane, most of this chemical can be recovered for recycling use.
Q: What will be happened if without good dewaxing?
A: Without good dewaxing, the final oil will be not so transparent as the oil with good dewaxing, especially in cold weather, the oil will easily become milky, or some solid inside.
Q: Do you offer oversea installation ,commissioning and training?
A: Yes. We will send experts to install, commission the plant and train workers.
Copyright © 2017 - 2018Shandong Leader Machinery All Rights Reserved