Industrial microwave moringa leaf dryer and sterilization/microwave dehydration equipment
|BODA Industrial microwave dryer oven/ small cabinet microwave drying machine|
|Microwave frequency (MHz)||2450±50|
Number of trays
|Drying area||0.5 square meters|
|Microwave leakage limit(mW/cm2)||1 mW/cm2|
|Ambient temperature(℃)||Normal temperature|
|Environment requirement||No excessive corrosive gas, no inflammable, explosive gas|
Following are the sizes of hot selling continuous microwave dryer.
|Microwave dryer Model||Microwave frequency (MHz)||Microwave power||Microwave leakage||Dryer dimension (m)||Installation area (m)|
The microwave dryer is used to dry all kinds of fruits, vegetables, spices, seasonings, herbs in low temperature to preserve the original nutrition of them. We have speical microwave dates dryer, microwave chilli dryer, microwave mushroom dryer.
Microwave drying machine has a number of quantitative and qualitative advantages over conventional drying machines so that it becomes more and more popular. One main advantage is the place where the heat is generated, namely the product itself. Because of this, the effect of small heat conductivities or heat transfer coefficients does not play such an important role. Therefore, larger pieces of foods can be heated in microwave dryer in a shorter time and with a more even temperature distribution. The another main advantages is the short drying time, low drying temperature of industrial microwave dryer oven.
Packaging & Shipping
Wooden packing for each set of microwave dryer if needed.
Soft packing is supplied.
BODA provides a full range of services and technical support for industrial microwave systems, for both drying oven and continuous drying machine. The services include custom installations, preventive equipment maintenance, equipment upgrades and modifications and microwave system repair.
1. What is Microwave?
Microwaves are a form of electromagnetic energy with frequencies between 300 MHz and 300 GHz, generated by magnetrons under the combined force of an electric and a magnetic field perpendicular to each other.
2. What is the advantage of Microwave dehydrator compared to Conventional dehydrator?
Conventional dehydrator is a surface dehydration method, which is not only slow, but also non-uniform with the surfaces, edges and corners being much dehydrated than the inside of the material. The imperfect dehydration will cause product rejections, waste energy and extend process time.
Microwave fruit dehydrator and vegetable dehydrator is a direct method of dehydration. Energy is transferred through the material electro-magnetically, not as a thermal heat flux. Therefore, the rate of dehydration is not limited, the uniformity of heat distribution is greatly improved and dehydration time is reduced.
3. How about safety?
Using scientific structure and patented suppression system, BODA industrial microwave dehydrator poses no threat of electromagnetic radiation to the health and safety of equipment operators.
4.What about maintenance?
In addition to downtime for cleaning and inspection, conventional dehydrators and heat exchangers need periodic servicing with an expensive inventory of parts and a highly trained labor force. For microwave dehydrator, the only part that requires maintenance is the magnetron. In the event of a malfunction or misuse through incorrect operation, this can easily be replaced in less than thirty minutes. Generally, BODA recommends that the magnetron of industrial microwave dehydrator be replaced annually or after 8,000 hours of operation, whichever is sooner.
Were one of the main manufacturers and suppliers of a range of and spares needed for oil extraction plants. Currently a wide range of Industrial moringa leaf dryer and sterilization/ dehydration equipment including expellers, seed cleaners, decordicator, copra cutter, filter press, Boilers, Hammer Mill etc. A lot of can be employed in the whole oil extraction plant. Our oil extraction machine is fabricated with the most up-to-date extraction technology and premium quality raw materials, our Industrial moringa leaf dryer and sterilization/ dehydration equipment are be applied on your extraction of oils. This ensure higher production without any breakdown. The is proper for a number of seeds and nuts like Sesame Seeds, Sunflower, Palm Kernel,Cocoa,Coconut,Castor,Cotton Seed,Almond, Apricot (Germ) etc.
Structure of New type automatic
1.Characteried of Industrial moringa leaf dryer and sterilization/ dehydration equipment by simple design, easy to operate and maintenance
2.Cast iron machine base
3.High productivity ,energy saving and labour saving
4.Special gear box structure of make the rotating speed averagely
5.Compact structure, stable functions
6.Main parts of chamber through the processing of high-temperature tempering and low temperature quenching;
7.Compact structure, stable function.
Copyright © 2017 - 2018Shandong Leader Machinery All Rights Reserved