Meanwhile Competitive Price Small Screw Flaxseed Oil Press particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.
hydraulic oil press machine, High oil yield sesame hydraulic oil press 45kg, also knowed as Competitive Price Small Screw Flaxseed Oil Press, hydraulic oil press, oil extruder, oil mill, which adopts hydraulic principle to produce pure and assured edible oil. The whole cooking oil expelling process is visible and needs only about 5-7 minutes; is quite suitable to individual households and small oil mills in the countryside due to its little room occupancy and high pressing speed.It is available to sesame, Competitive Price Small Screw Flaxseed Oil Press walnut kernels, pumpkin seeds, kiwi seeds,tea seeds and almonds,etc.
is mainly used for peanuts, walnuts, almonds, soybeans, coffee bean, sesame seeds and other oil plants seeds, backing and drying. Most oil seeds need to be roasted to press more thoroughly and get high oil yield. Competitive Price Small Screw Flaxseed Oil Press is manual control of electromagnetic heating equipment, when you fried different crops, the temperature should adjusted according to the needs.
Competitive Price Small Screw Flaxseed Oil PressProduct Description
This oil press with cold and hot pressing function,fit for more than 20 kinds of materials:such as Peanuts,sesame,walnut,rapeseed,sunflower,soybeans,castor beans,pumpkin seeds,eans,watermelon seeds,moringa seeds,pine nuts,hazelnut kernels,almonds.
1.High oil extraction rate;about 2-3 percent higher than other oil press equipment.
2.Energy saving and labor saving.press 5kg raw materials just needs 1kilowatt-hour.
3.Cold and hot pressing,rich mutrition,pure natural oil,save refining costs.
4.Import dual-core,Intelligence chip.
5.High speed of oil extraction, 0.5kg raw materials only needs 7-10minutes.
6.Virgin food grade 316 stainless steel screw and chamber.
7.easy operation,The elderly and children can use it also.
Capacity and output(One hour):
Peanuts one hour 4kg - 1.75kg of oil
Sesame one hour 6 kg - 2.75 kg of oil
Sunflower kernel one hour 4.5 kg - 2.04 kg of oil
Walnut meat one hour 4.5 kg - 2.1 kg of oil
Rapeseed ,One hour 5.5kg-1.9kg of oil
Tea seed, one hour 3.5 kg - 1.25 kg of oil
Flax seed, one hour 5.5 kg - 1.9 kg of oil
Walnut,one hour 4.5kg - 2.1 kg of oil
Soybean one hour 4 kg - 0.75kg of oil
The oil press is full stainless steel, with pure copper motor.
The screw adopts 316 stainless steel, can press both soft and hard raw materials.
The oil press coats with stainless steel wire drawing, appearance is beautiful.
New advanced technology and patent screws design, get a high oil extraction rate.
Hot pressed oil: such as peanuts, sesame, tea seed, walnut, home wok fried 7 8 cooked, softening under the epidermis and then extract the oil rate of oil well.
Directly pressed oil: such as flax seed, perilla seed, sunflower seed, but the machine or to start preheating oil.
Special attention to the raw materials can not be pressed, corn, olives, rice, pork, rice.
As above mentioned, our model KXY-OP03 body material is 304 stainless steel, screw and chamber adopt 316 stainless steel.
Usually, oil press sold in the market, screws and chambers are often 304 stainless steel.
Compared with 304 SS, 316 stainless steel has following advantages:
1. Temperature resistance:
304 temperature to maximum 800 degree; 316 SS adds Mo element, improve corrosion resistance and high temperature strength, temperature resistance can reach 1200-1300 degree.
2. Corrosion resistance:
316 SS is mainly used in food industry and surgical equipment, add Mo made it gain a special structure of corrosion resistance.
3. Wear Resistance:
316 SS adds Mo, its function is carbonation agent, avoid steel embrittlement. After heat treating, because of high carbon content, can gain higher hardness, less wear than 304.
Ni and Mo in 316 SS are rare element, price is expensive. And manufacturing technique is more complex, so production cost of 316 is much more than 304.
Our machines undergo an extensive and strict testing and quality control procedure, ensuring each and every item purchased meet global quality standards.
Any comments, suggestions are accepted. We will be very grateful to your positive footprints left in our company. If you have any problem with our products, please leave a message to us.
Any comments, suggestions are appreciated from our customers. Customers' comments will be along with our growing-up experience.
Copyright © 2017 - 2019Shandong Leader Machinery All Rights Reserved