10TPH FFB Palm oil mill, palm oil mill screw press
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in
global grain and oil industry.
2, We have deep cooperation with Henan Machine Design Research Institute and Henan
University of Technology. Our professor often go abroad attending grain and oil conference and forum.
3, We have completed service line including technical department, engineering department,
project department, electronic commerce department, domestic trade department and foreign trade department.
After signing contract, we will set up special team including engineers, installation technicians, drawing
designer, business person, after-sales service person, and so on. We will provide one-to-one service.
Whole set of equipment for production line.
Motor and power control system.
Installation and test-run.
Drawing of process description, equipment layout, foundation and
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.
Main Business Field
1, 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
2, 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake
extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
3, 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop
4, DTDC separated machine, the full negative pressure evaporation,
5, Paraffin wax recovery, leaching workshop degumming, phospholipid concentration.
6, 30-1000T/D continuous physical (chemical) refining line.
7, 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
8, 10-200T/D fatty acid esterification edible ol production line.
Available Oil Raw Materials:
Machines and equipment to start up palm oil refining plant with CE BV Certifications What kind of crude vegetable oil can be refine?
Crude soybean oil, palm oil, palm kernel oil, sunflower oil, canola oil(rapeseed oil)
sesame oil, conttonseeds oil etc.
Machines and equipment to start up palm oil refining plant with CE BV Certifications The main part of refining.
Machines and equipment to start up palm oil refining plant with CE BV Certifications Hydration Deguming & Alkali Refining Deacidification
The crude oil is output by the oil feed pump from the oil tank, and next enters the crude
exchanger to recover part of heat after metering and then is heated to the required
by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid
phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to
the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Add the alkali for neutralization, and the alkali quantity and alkali solution concentration
on the quality of the crude oil. Through the heater, the neutralized oil is heated to the
suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in
the crude oil.
Then the oil goes to the washing process.
(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.
(3) Deodorizing section: to remove off the odor components in oil.
(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.
(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature
reach above 280C.
(6) Steam generator: produce the needing steam for de-odoring and distillation.
(7) 10TPH FFB Palm oil mill, palm oil mill screw press, continuous oil refining equipment pump: supply needing 10TPH FFB Palm oil mill, palm oil mill screw press, continuous oil refining equipment for dehydrate, de-color, de-odor. 10TPH FFB Palm oil mill, palm oil mill screw press, continuous oil refining equipment degree
can reach above 755mm Hg.
(8) Press filter: filter clay, filter out clear oil.
(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.
1 Engineers to the scene to guide the installation;
2 Online question reply;
3 The warranty period of 12 months;
Our engineers in guiding workers how to operate the machine:
Packaging & Shipping
If you have interest in our machine, please kindly send us your inquiry details in the Below , Click Now!
Were one of the main manufacturers and suppliers of a range of and spares needed for oil extraction plants. Currently a wide range of 10TPH FFB Palm oil mill, palm oil mill screw press, continuous oil refining equipment including expellers, seed cleaners, decordicator, copra cutter, filter press, Boilers, Hammer Mill etc. A lot of can be employed in the whole oil extraction plant. Our oil extraction machine is fabricated with the most up-to-date extraction technology and premium quality raw materials, our 10TPH FFB Palm oil mill, palm oil mill screw press, continuous oil refining equipment are be applied on your extraction of oils. This ensure higher production without any breakdown. The is proper for a number of seeds and nuts like Sesame Seeds, Sunflower, Palm Kernel,Cocoa,Coconut,Castor,Cotton Seed,Almond, Apricot (Germ) etc.
We believe that regardless of the oil extraction plant is, quality could be the heart of company's performance. We treat quality & service as a means of life. As soon as you prefer to know more details about our oil processing plants, write to us now!
Copyright © 2017 - 2019Shandong Leader Machinery All Rights Reserved