Meanwhile Hot sale peanut oil extraction machine with peanut seed oil refinery particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.
hydraulic oil press machine, High oil yield sesame hydraulic oil press 45kg, also knowed as Hot sale peanut oil extraction machine with peanut seed oil refinery, hydraulic oil press, oil extruder, oil mill, which adopts hydraulic principle to produce pure and assured edible oil. The whole cooking oil expelling process is visible and needs only about 5-7 minutes; is quite suitable to individual households and small oil mills in the countryside due to its little room occupancy and high pressing speed.It is available to sesame, Hot sale peanut oil extraction machine with peanut seed oil refinery walnut kernels, pumpkin seeds, kiwi seeds,tea seeds and almonds,etc.
is mainly used for peanuts, walnuts, almonds, soybeans, coffee bean, sesame seeds and other oil plants seeds, backing and drying. Most oil seeds need to be roasted to press more thoroughly and get high oil yield. Hot sale peanut oil extraction machine with peanut seed oil refinery is manual control of electromagnetic heating equipment, when you fried different crops, the temperature should adjusted according to the needs.
a. Pre-press: Press the flakes to leave about 16%-18% in the cake. The cake will go to extraction process.
b. Second oil press: Press the cake till the oil residue is about 5%.
c.Oil extraction effect is good, high oil extraction rate.
oil solvent extraction has been widely used in the edible oil production industry, more oil can not only but also for oil solvent extraction, fully extract contained in oil rich in protein resources, edible oil extraction process of our equipment oil with high efficiency, good quality and our meal, the edible oil processing project low cost production a good environment etc.
Main oil process of peanut oil extraction machine :
1. Solvent pumps: continuously spray solvent to the rotary-type extractor.
2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. DTDC: usd to separate the solvent from the wet meal.
4. Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , then add saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant precipitate,reaching the goal of purifying.
5. Miscella tank 2nd: the purified miscella will be pumped into it.
6. Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7. Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
Main Refining process section of peanut seed oil refinery:
a. Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
b.Decoloration Section: used to remove off pigments, bleaching oils and grease dehydrate.
c. Deodorization Section: to remove off the odor components in oil.
d. Dewaxing Section: used to remove off the wax in the oil, in order to get the high quality oil.
main process equipment of peanut seed oil refinery:
1. Decoloring tank: bleach pigments from oil.
2. Deodorizing tank: remove the un-favored smell from decolorized oil.
3. Oil furnace: provide enough heat for the refining sections which need high temperature of 280℃.
4. Hot sale peanut oil extraction machine with peanut seed oil refinery pump: provide high pressure for bleaching, deodorization which can reach 755mmHg or more.
5. Air compressor: dry the bleached clay after bleaching.
6. Filter press: filter the clay into the bleached oil.
7. Steam generator: generate steam distillation.
In Physical Refining, Vegetable Oil is subject to distillation to remove free fatty acids. The alkali treatment is completely avoided. This reduces the amount of waste water and eliminates production of soap. This process is becoming more popular.
Chemical Refining :
In Chemical Refining, Vegetable Oil is treated with caustic lye for separation of free fatty acids from oil. This is a conventional process that can be applied to all oils. A byproduct of alkali refining is soapstock, which is used for manufacture of low quality washing soap. Alternately, the soapstock can be treated with acid to recover fatty acids. The waste-water from refinery requires extensive treatment. This can be avoided by alternate Physical Refining process.
Oil process technical parameters for peanut seed oil refinery:
|Steam consumption||≤ 300Kg/T oil|
|Bleaching earth||1-3Kg/T oil|
|Power consumption||≤ 22KWH/T oil|
|Fuel consumption||10-20Kg/T oil|
|deodorization loss consumption||≤0.5%|
|Oil content in waste white clay||≤ 23%|
|Phosphoric consumption||0.5-1Kg/T oil|
|Soft water consumption||≤ 160Kg/H|
|refining losses (chemical reinfing)||acid valuex 1.2|
|refining losses (physics refining)||acid valuex 0.6|
|phosphoric acid||2-3KG/T oil|
|refining rate||refining consumption 1%|
Henan Maosheng Group
Henan Maosheng Group was founded in 1976, after forty years of development and growth,the company has become a well-known grain and oil machinery manufacturing enterprise in China with import and export rights. In 2002,our company passed ISO9001 Quality Management System Certificate, and established the National Food Processing Equipment Engeering R&D Sub-center and the provincial post-doctoral research base and other research and development plasforms.
Our services about mini edible oil refinery :
1.Ensure providing complete equipment and its accessories on time, Time is gold.
2.Ensure the installation and adjustment are once accepted, provide professional design for you Project.
3.We are a 40 years old enterprise and we can ensure providing high-quality equipments with competitive price.
4.We have nearly 300 service team for you to solvent question any time.
5.Providing the operating technicians professional training to ensure operate independently.
6.Engineers will provide professional guidance for you and during the installation process we have professional installation team.
Q1 : Which kind of other materials can be processed?
All kinds of oil seeds. For example, sunflower seeds, rice bran, corn germ, palm fruit, palm kernel, coconut, peanut, soybean, sesame, cottonseeds, rapeseed, etc.but will have some oil equipment is different,we will design the best edible oil production machine for you.
Q2 : What's the capacity of this oil making machine?
Generally, 10-5000 tons per day. We can also manufacture as per customers' requirements.
Q3 : How long is the warranty?
The main parts of the machine come with one year warranty and after the expiration our engineer is available overseas to do the maintenance work.
Q4 : Can the machine be installed locally?
We can do the turn-key projects or other services according to customers'requirements, according to this condition, our services include manufacturing, purchasing, transporting, installation, training labors etc.Contact me
Send inquiry to us below then Click "send"Now! But in the quotation befor we need to know some information:
1. machine name?
2. what raw material do you mainly processed?
3. How many tons do you want to process pre day?
4. Please leave your email and phone number,we will send file for you reference.
Copyright © 2017 - 2019Shandong Leader Machinery All Rights Reserved