Precision Industrial Precision Industrial vacuum drying oven drying oven
XF Precision Industrial vacuum drying oven Ovens
C-Tech Precision Industrial vacuum drying oven ovens are easy to use and have functional and practi-cal equipments.
They are suitable for various applications: mild drying of delicate products, thermal treatments of oxydable materials, speed drying of cosmetic, plastic, electronic, chemical or agri-food industries.
A highly versatile range of compact Precision Industrial vacuum drying oven ovens. These Precision Industrial vacuum drying oven ov-ens enable heat sensitive materials to be dried at low temperature.
More stable samples can be dried at higher temperature up to 200°C
You can use our Precision Industrial vacuum drying oven ovens for any laboratory or industrial applica-tion.
Designed to operate from room temperature +20°C up to 200°C
Final Precision Industrial vacuum drying oven of 10-2 mBar, depending on the Precision Industrial vacuum drying oven pump used.
Temperature time fluctuation: less than ± 0,2°C.
- Four sizes from 20 to 240 litres.
- The inner casing is made of corrosion resistant stainless steel, with rounded corners.
- The outer casing is made of sheet steel, finished in a tough stoved epoxy paint (colour light grey RAL7035).
- No contact between inner and outer casing and an optimised insulation minimises heat dissipation.
- The walls are insulated with glasswool, low external temperatures and excellent thermal stability.
- The door is a thick toughened glass plate.
- The silicone rubber gasket provides a good seal between the door and the oven body.
- The insulation and the gasket are asbestos-free.
- The door is hinged on the right hand side.
The chamber is heated by large area heaters strapped to its outer surface.
No-wear switching (solid state relay) is used for activating and deactivating the heating elements.
As an option, internal heating plates can be installed instead of the external heating elements.
Precision Industrial vacuum drying oven CONTROL:
An exhaust solenoid valve is situated for convenience connection to a Precision Industrial vacuum drying oven pump. The inlet solenoid valve ac-cept air entry or inert gas connection.
A Precision Industrial vacuum drying oven gauge is fitted showing Precision Industrial vacuum drying oven pulled from 0 to 1000 mBar.
The valve is a 3-position manual for the 20 litres model.
TEMPERATURE CONTROL & SAFETY:
Temperature sensor is a J thermocouple inside the chamber. The temperature is controlled by a precise micropro-cessor based-controller that provides a high accuracy and prevents the set temperature from being exceeded.
The independent over temperature thermostat cut out has an adjustable upper limit, giving a class 3.1 protec-tion.
The auto tune PID digital controller digitally displays the set and actual values of temperature, and incorporates a heater indicator lamp.
The control panel houses an ON/OFF switch and a fault indicator lamp which lights when the safety thermostat comes into operation.
ALL C3000 CONTROLLER FUNCTIONS:
The PID digital controller offers the following functions
- Temperature Measurement with Pt100 Ω.
- Set and actual temperature display.
- Delayed start: from 1mn to 99h59 mn.
- Heating ramp: from 0,1 to 20°C/mn.
- Heating timer: 0 to 99h59 mn.
- Repeat loop.
- Buzzer at the end of the cycle.
- Overtemperature cut out.
Multiple position shelving for convenient loading / unloading.
Additional shelves are available.
Precision Industrial vacuum drying oven is our company's self-developed Precision Industrial vacuum drying oven according to European and American equipment, Precision Industrial vacuum drying oven has a high degree of automation, stability, simple operation, high yield, short process time and other characteristics, and effectively improve the various defects in the original tradition. Widely used in all kinds of baby rice noodles, sesame paste, walnut paste products, is a new and efficient . produced foods with unique shape, many flavors and colors, and scientific scientific nutrition, has a reasonable structural design, screw is a special material, has a fast self-cleaning function, high machine stability, easy to learn, accurate parameters Control can ensure that the products produced have the same shape, taste and color.
Jinan Joysun Machinery Co., Ltd. was established in 1993. Jinan Joysun Machinery Co., Ltd. is located in Shandong Province with a registered capital of 2 million RMB and covers an area of 9,800 square meters. Jinan Joysun Machinery Co., Ltd. is a professional food machinery manufacturing company integrating research and development, professional production, direct sales and after-sales services. We took the lead in awarding and passing the quality standards of commercial products in Shandong Province, and successfully passed ISO9001:2008 international quality management system certification, and exported to the European Union's CE safety certification, BV certification, third-party certification. Now we have successfully obtained the trademark.
Copyright © 2017 - 2018Shandong Leader Machinery All Rights Reserved